No Frame/ Frameless
Sliding Both Way
Sliding Track: Aluminium
Roller: Brass chromed with industrial nylon heavy duty roller
An ideal size for a shower area is minimum 3.5′ Length. This Wall To Wall Shower Screen will cover the length to prevent water splashing around while you shower. To do this, you will need to measure the opening between the walls, you can do a quick measure by calculating how many floor tiles it contains between the two walls (Standard tile size is 8 inches, 1 foot and 2 feet). With this measurement, you will be able to know the size of your Shower Screen.The standard height for a Wall To Wall Shower Screen is 1800mm (6 feet), however we can custom made just any size to your liking.
All of our Shower Screen are custom made and our experienced technician will do a site consultation to work out the best solution for you.
For a quick tutorial to how to design a great Wall To Wall Shower Screen, we provide you some tips as below:-
>> If your measurement between the walls is less than 900mm, we will recommend just one piece of door only
>> If your measurement between the walls is between 900mm~1500mm, we will
recommend a Sliding Type or a Swing Door model. Sliding Type is always a better choice for limited space as it does not consume Swing Door opening area as compared to a Swing Door Shower Screen.
>> If your measurement between the walls is more than 1500mm, we will recommend 1 fix panel at each side with the door at the center. This will become a three-piece Wall To Wall Shower Screen.
Glass Material Type
10MM Tempered Glass
RELIANCE HOME Glass is safety glazing material, conforming to the requirements of ASTM C 1048, ANSI 97.1, BS 6206, etc.
RELIANCE HOME Tempered Glass is more resistant to thermally induced stress and can, therefore, resist thermal shock which can cause ordinary annealed glass to crack.
RELIANCE HOME Tempered Glass is approximately 4 to 5 times stronger than ordinary annealed glass. It has a higher bending strength and is more resistant to impact.